High Pressure Pipe Plug

High pressure Pipe Plugs are mainly made up of a metal body bonded to extra reinforced rubber. These pipe plugs are mechanical devices used for sealing and plugging the end of a pipe, which facilitates the hydrostatic testing and isolation of pressure barriers.

HPP are manufactured to resist excessively high pressures, so that the plugged ends can stay in place with total control while the section of pipe in question is pressurized.

Order High Pressure Pipe Plugs from PlugCo

PlugCo supplies high quality high pressure pipe plugs. These plugs are suitable for high pressure applications, they are able to withstand and resist a back pressure of 6 bar. The limited back pressure the PlugCo HPP can withstand depends on the customer’s needs. If the customer needs a plug that can withstand a higher back pressure (more than 6bar), then the PlugCo team will always be able to supply it. Thus, PlugCo’s high pressure pipe plugs can be custom made to meet the customer’s project requirements, as can most of our products such as Our High pressure Joint Tester, our Inflatble Pipe Plug, our Air Discharge Adaptors, and other products.

Pipe Plug Back Pressure Chart

Back pressure is the most critical issue for users of on-site pipe plugs. It is the force that the pipe plug maintains during the process. Pipe plugs are usually subjected to enormous back pressure that is generated in the pipe. Therefore, the back pressure must be calculated precisely to avoid the pipe plug from slipping inside the pipe. Slipping of the plug can lead to dangerous results.

HPP Model Size, inflating Pressure, Back Pressure, etc.

The following technical table shows the Nominal Size, the Usage Size Range, the back pressure and other details about each High Pressure Pipe Plug model.

Technical Table

Model# Nominal Size Usage Size Range Inflation Pressure Back Pressure Deflated Plug Bypass Size
Min. Dia. Max. Dia. Diameter Length
HPP100 100mm
4”
96mm
3,8”
108mm
4,3”
8bar
116psi
6bar
87psi
89mm
3,5”
580mm
23,2”
3/4”
HPP150 150mm
6”
146mm
5,7”
158mm
6,2”
8bar
116psi
6bar
87psi
139mm
5,5”
580mm
23,2”
3/4”
HPP200 200mm
8”
196mm
7,7”
208mm
8,2”
8bar
116psi
6bar
87psi
185mm
7,3”
680mm
27,2”
2”
HPP250 250mm
10”
246mm
9,7”
258mm
10,2”
8bar
116psi
6bar
87psi
235mm
9,3”
650mm
26”
2”
HPP300 300mm
12”
296mm
11,7”
308mm
12,1”
8bar
116psi
6bar
87psi
285mm
11,2”
650mm
26”
2”
HPP400 400mm
16”
396mm
15,6”
408mm
16,1”
8bar
116psi
6bar
87psi
385mm
15,2”
650mm
26”
2”
HPP450 450mm
18”
446mm
17,6”
458mm
18,1”
8bar
116psi
6bar
87psi
435mm
17,1”
650mm
26”
2”
HPP500 500mm
20”
496mm
19,5”
508mm
20,1”
8bar
116psi
6bar
87psi
485mm
19,1”
650mm
26”
2”
HPP600 600mm
24”
596mm
23,5”
608mm
24,1”
8bar
116psi
6bar
87psi
585mm
23.1”
650mm
26”
2”
HPP700 700mm
28”
696mm
27,4”
708mm
28,1”
8bar
116psi
6bar
87psi
685mm
27”
650mm
26”
2”
HPP800 800mm
32”
796mm
31,3”
808mm
32,1”
8bar
116psi
6bar
87psi
785mm
30,9”
650mm
26”
2”
HPP900 900mm
36”
896mm
35,3”
908mm
36,1”
8bar
116psi
6bar
87psi
885mm
34,8”
650mm
26”
2”
HPP1000 1000mm
40”
996mm
39,2”
1008mm
40,1”
8bar
116psi
6bar
87psi
985mm
38,8”
650mm
26”
2”
HPP1100 1100mm
44”
1096mm
43,1”
1108mm
44,1”
8bar
116psi
5bar
73psi
1085mm
42,8”
650mm
26”
2”
HPP1200 1200mm
48”
1196mm
47,1”
1208mm
48,1”
8bar
116psi
4bar
58psi
1185mm
46,7”
650mm
26”
2”
HPP1400 1400mm
56”
1396mm
55”
1408mm
56,1”
8bar
116psi
4bar
58psi
1385mm
54,5”
650mm
26”
2”
HPP1500 1500mm
60”
1496mm
58,9”
1508mm
60,1”
8bar
116psi
3bar
44psi
1485mm
58,5”
650mm
26”
2”
HPP1600 1600mm
64”
1596mm
62,8”
1608mm
64,1”
8bar
116psi
3bar
44psi
1585mm
62,4”
650mm
26”
2”
HPP1800 1800mm
72”
1796mm
70,7”
1808mm
72,1”
8bar
116psi
3bar
44psi
1785mm
70,3”
650mm
26”
2”
HPP2000 2000mm
80”
1996mm
78,6”
2008mm
80,1”
8bar
116psi
1,5bar
22psi
1985mm
78,1”
650mm
26”
2”

*Always use Support/Bracing for the plug against sliding!!!

** Custom Production is Available

Find the answers to all your questions about High Pressure Pipe Plug

  • What is the most importing thing about High Pressure Pipe Plug?+

    PlugCo is considering the safety as its first priority. That’s why we are always insisting on following the safety instructions in our Safety Manual to avoid the Plugs sliding or bursting, which can result in bodily injury, death or property damage!

  • What is the material of High Pressure Pipe Plug?+

    The High Pressure Pipe Plug is made of steel body bonded to extra reinforced SBR+NR Rubber.

  • Can we use one HPP Model for many pipe sizes?+

    HPP Model is single size pipe plug which means that you can use one HPP Model for only one pipe size. For example, you can use HPP1200 for only 1200mm diameter pipe.

  • Is PlugCo offering any training of how to use High Pressure Pipe Plug?+

    PlugCo is providing trainings to its clients of how to succeed their test and how to use the High Pressure Pipe Plugs correctly, and in the end of training, PlugCo is giving certificates to the concerned ones. In addition, PlugCo is assisting its clients by providing on-site supervision.

  • What are the storage conditions of the High Pressure Pipe Plug?+

    The High Pressure Pipe Plug should be stored in a dark & dry place, away from direct sunlight, and the temperature must be between +5°C and +25°C. In addition, before and after each use of the Plug, be sure to clean the external surface of the plug. However, NEVER Clean the plug with solvents, hydrocarbons or other aggressive agents.

Pipe Plug Inflation Pressure

The inflation pressure, also referred to as the working pressure, indicates the pressure that is required to inflate the plug with air. It is the pressure within the plug that comes from the air supply (compressor or hand pump).

High Pressure Test Plugs are used for what?

High pressure Test plugs are a series of Pipe plugs that are commercially available from PlugCo. They are available for applications with a use size ranging from 100 mm to 2000 mm. These Pipe plugs are typically used in high pressure applications, which normal inflatable rubber plugs cannot hold.

Cases where we recommend HPP as the perfect solution

We provide the PP model, the standard model, if the diameter of the pipe is ≤ 1200mm and the inflation pressure is ≤ 3 bar. Or if the pipe diameter is 1300mm≤…≤2000mm and the inflation pressure is ≤1,5 bar.
But if the pressure is higher than the above, the best solution to provide is HPP.

Pipe Testing Plugs High Pressure; features and benefits

Among the most important benefits of using high pressure plugs is the reduction in materials and labor associated with conventional methods of sealing pipeline. This ultimately leads to a significant reduction in overall time and cost. In addition, the availability of standard sizes in a variety of configurations to meet specific customer applications. And Note also their Capability of testing pipes with operating pressures from 100 mm to 2000 mm.

As a manufacturer of pipe plugs, the production of high pressure pipe plugs proves the good quality of the material compared to other manufacturers.

There are two ways to prevent the plugs from sliding: firstly, by reinforcing and supporting the plugs or by using our new product “the Smart Plug”, which is more practical because it has the ability to know the counter-pressure that the plug can withstand and control it by pumping, and then provide the appropriate support. In addition, the Smart Plug is equipped with an alarm system that can warn users if the plug is going to slide during application.

PlugCo‘s logistics department delivers to our customers all over the world. Our customers receive their products at their own address.

The PlugCo team is always available to meet your specific needs. It will be a pleasure to work with you too, dear customer.

×